Import finance in Bangladesh: options, rules and how to choose
Key takeaways
- Import finance answers one question: who funds the gap between paying the supplier and selling the goods? It can be the supplier, a foreign lender, your AD bank, or you.
- The main rulebook is FEPD-1 Circular No. 30 of 13 August 2026. It sets how you may pay (LC, contract, collection, advance) and the longest credit period for each type of goods.
- Usance credit from abroad has a cost ceiling: all-in cost of up to 3.00 percent a year above the benchmark rate (Part D ¶2).
- Credit periods depend on the goods. Industrial raw materials get up to 270 days or the cash conversion cycle, if shorter. Capital machinery gets up to 3 years (Part D ¶1).
- This page is the map. Detailed guides cover UPAS, LC margin, post-import stock finance and contract imports without LC.
What import finance covers
An importer has three money problems. Before shipment, the supplier may want security or cash up front. At shipment, the supplier wants to be paid, often before the goods arrive. After arrival, the importer must pay duty and taxes and hold stock until it sells. Import finance is the set of tools banks and lenders use to cover each of these gaps.
In Bangladesh every tool must fit two frames at once: the bank’s own credit approval, and the foreign exchange rules in Circular 30 and the Import Policy Order (IPO) in force. A loan the bank is happy with can still be impossible if the payment method or tenor breaks Circular 30.
How an import is financed, stage by stage
- Contract and payment method. The importer agrees a proforma invoice. For each line it shows the 8-digit HS code, price and terms (Circular 30 Part A ¶7). It also chooses LC, contract, collection or advance.
- Reporting. The AD reports the import to Bangladesh Bank’s online system (OIMS) under Part A ¶5. For a single import of USD 3.00 million or more, the report is due at least 24 hours before the LC is opened (Part A ¶6).
- Security for the supplier. The AD issues the LC. Under Part B ¶3(1), import LCs must be documentary and call for full sets of shipped transport documents. The AD may ask for cash margin. See our LC margin guide.
- Payment at shipment or maturity. At sight the AD pays from the importer’s funds or a loan. On usance terms, the supplier or a lender waits until maturity, or someone discounts the accepted bill.
- Arrival and clearance. The importer clears the goods and gives the AD the customs-certified bill of entry within four months of the remittance (Part A ¶8(2), Part B ¶14(1)). For usance imports the four months run from acceptance of the documents. For buyer’s credit they run from the foreign lender’s payment (Part B ¶14(2)–(3)).
- Post-import. If the importer needs time to sell, the bank may finance the stock. See our stock and warehouse finance guide.
The main options and the Bangladesh rules for each
Sight LC funded by the importer or the AD
The simplest route. The AD pays at sight and debits the importer, or books a short-term loan. The UCP 600 credit gives the supplier a bank promise. The cost is the bank’s pricing and margin.
Supplier’s credit (usance LC or deferred payment)
The supplier agrees to be paid later. Under Part D ¶1, the usance period is capped by type of goods, and any usance interest falls under the Part D ¶2 ceiling. The LC is opened on usance terms and the AD accepts the bill at sight of documents.
Buyer’s credit and UPAS
A foreign bank or the AD’s offshore banking unit (OBU) pays the supplier at sight, and the importer repays at maturity. Part D ¶3 applies the same cost ceiling. Part E ¶2(1)(c) says usance imports should be financed through buyer’s credit by offshore banking operations, or by the AD’s own funds under Part D ¶4. Usance payable at sight (UPAS) is the LC version of this: the supplier is paid at sight and the importer pays at the usance date. See our UPAS guide and the UPAS vs supplier’s credit cost comparison.
Imports under contract, without LC
Part C ¶1(1) allows eligible importers to import on usance under supplier’s or buyer’s credit through a purchase or sales contract. Conditions include a satisfactory track record, a credit report on the supplier, the importer’s undertaking on cash flow, and no earlier contract import left unpaid beyond maturity. Part C ¶1(4) limits commercial imports without LC to D/P, with general permission for usance up to 60 days. Part H ¶3(b) adds that ADs take no payment obligation on such contracts unless they separately contract to. See import without LC.
Short-term external borrowing
Part C ¶1(3) allows importers to arrange short-term finance from external sources within the cost ceiling. The lender may support it with LCs, standbys or guarantees to the supplier. Importers may give corporate, personal or third-party guarantees to foreign lenders under a general waiver from section 13(1) of the FER Act, 1947. That waiver does not cover bank guarantees or standby LCs.
Advance payment
Part B ¶12 allows advance remittance against a repayment guarantee from a bank abroad. Advances up to USD 20,000 may be made without one, subject to five conditions. Part H ¶3(a) confirms this and allows up to USD 50,000 from ERQ accounts.
Import supply chain finance
Part H ¶4 encourages buyer’s credit, supplier finance and payables finance. It also allows non-recourse discounting of a creditworthy importer’s accepted bills. Before launching such a product, the AD must inform FEPD-1 and wait for acknowledgement (¶4(3)). See our supply chain finance guide.
Islamic import finance
Islamic banks finance imports through sale-based contracts such as Murabaha and Bai-Muajjal rather than interest-bearing loans. See our Islamic trade finance guide.
Usance limits in Circular 30 Part D ¶1
| Goods | Maximum usance | Paragraph |
|---|---|---|
| Industrial raw materials for own use (including LPG) | 270 days or the cash conversion cycle, whichever is earlier | ¶1(1)(a) |
| Agricultural implements and chemical fertilisers | 270 days | ¶1(1)(b) |
| Spares | 360 days | ¶1(1)(c) |
| Vessels for scrapping | 360 days | ¶1(1)(d) |
| Certified life-saving drugs; ophthalmic equipment | 180 days | ¶1(1)(e) |
| HR coil, scrap, pig iron, sponge iron for steel makers | 360 days | ¶1(1)(f) |
| Unprocessed yarn (stated conditions) | 270 days | ¶1(1)(g) |
| API and laboratory reagents (DGDA-approved) | 360 days | ¶1(1)(h) |
| HFO/HSFO for power generation (ministry approval) | 360 days | ¶1(1)(i) |
| Empty LPG cylinders | 360 days | ¶1(1)(j) |
| Raw material for pre-fabricated steel structures | 180 days | ¶1(1)(k) |
| Capital machinery and capital goods | Up to 3 years | ¶1(2) |
For back-to-back LCs, the usance follows the export repatriation period (¶1(1)(a)). Always read the current circular before quoting a tenor; these limits are amended from time to time.
Parties and documents
| Party or document | Role |
|---|---|
| Importer | Applicant and borrower; signs the IMP declaration |
| AD bank | Issues the LC, reports to OIMS, pays, monitors the bill of entry |
| Supplier and its bank | Beneficiary and presenting bank |
| Foreign lender or OBU | Funds buyer’s credit or UPAS |
| Proforma invoice and contract | Price, HS code, terms; basis for credit report thresholds |
| Credit report on supplier | Required above USD 30,000 for direct proforma invoices and USD 40,000 for indents (Part B ¶6) |
| IMP form and bill of entry | Evidence that the goods arrived for the money paid |
Risks and common mistakes
- Tenor longer than the goods allow. 360 days on raw material that only qualifies for 270 days. Check Part D ¶1 before the proforma is signed.
- All-in cost above the ceiling. Interest, arrangement fees and discount charges all count. Ask for one all-in figure.
- Maturity before the cash arrives. Raw-material usance is capped at the cash conversion cycle for a reason. If maturity comes before sales cash arrives, the importer has to find other money or a local loan to pay.
- Overdue acceptances. Part E treats failure to pay accepted bills on time seriously, including action against the AD. Banks track and report overdue accepted bills monthly.
- Missing bill of entry. The four-month deadline in Part B ¶14 also blocks future advance payments for that importer (Part B ¶12(b)(i)).
- Price risk. Commodity importers can hedge price exposure through their AD under FEPD-1 Circular No. 34 of 13 September 2026. See our structured commodity finance guide.
Illustrative example
Hypothetical parties and figures. DEF Plastics Ltd imports polymer resin worth USD 500,000 for its own factory. Its cash conversion cycle, on its own records, is about 150 days.
- Resin is an industrial raw material, so usance is capped at 270 days or 150 days, whichever is earlier. The ceiling here is 150 days.
- Because the value is under USD 3.00 million, the 24-hour advance OIMS report does not apply. Normal OIMS reporting does.
- XYZ Bank PLC opens a UPAS LC at 150 days. Its OBU pays the supplier at sight. The all-in cost quoted by the OBU is checked against the Part D ¶2 ceiling.
- DEF clears the goods and lodges the bill of entry within the four-month period in Part B ¶14.
- On day 150 DEF pays XYZ Bank, which repays its OBU.
Choosing between the options
| Option | Supplier paid | Importer pays | Bank promise to supplier | Key Circular 30 hook |
|---|---|---|---|---|
| Sight LC | At sight | At sight or via a local loan | Yes | Part B |
| Usance LC (supplier’s credit) | At maturity | At maturity | Yes, on acceptance | Part D ¶1–2 |
| UPAS / buyer’s credit | At sight | At maturity | Yes | Part D ¶3, Part E ¶2 |
| Contract on usance | At maturity | At maturity | No, unless separately contracted | Part C ¶1, Part H ¶3(b) |
| D/P collection | On payment | On release of documents | No | Part C ¶1(4) |
| Advance payment | Before shipment | Before shipment | Supplier’s bank guarantees refund | Part B ¶12 |
Frequently asked questions
Which import finance option is cheapest?
It depends on the all-in quote, the margin your bank holds, and how long cash is tied up. Compare like for like; our UPAS vs supplier’s credit page shows how.
Can I import without an LC?
Yes, within limits. Contract imports on usance are allowed for eligible importers under Part C ¶1(1). Commercial imports without LC are D/P, with general permission for usance up to 60 days (Part C ¶1(4)).
How long can I take to pay for imported machinery?
Industrial importers may import capital machinery and capital goods on usance of up to 3 years under supplier’s or buyer’s credit (Part D ¶1(2)).
Can I borrow from a foreign bank to pay my supplier?
Short-term external borrowing for admissible imports is allowed within the Part D ¶2 cost ceiling (Part C ¶1(3)). Borrowing abroad by private industrial enterprises beyond that, including supplier’s credits and foreign loans, needs prior authorisation from the Invest Bangladesh Authority. Short-term credit of up to one year from suppliers or buyers abroad follows Bangladesh Bank’s rules on current transactions (FEPD-1 Circular No. 32 ¶28).
Sources
Bangladesh Bank, FEPD-1 Circular No. 30, 13 August 2026 (import): Part A ¶5–8; Part B ¶3, ¶6, ¶12, ¶14; Part C ¶1; Part D ¶1–4; Part E; Part H ¶3–4. Open the cited source.
Bangladesh Bank, FEPD-1 Circular No. 32, 2 September 2026 (loans, guarantees and external borrowing): ¶28. Open the cited source.
Bangladesh Bank, FEPD-1 Circular No. 34, 13 September 2026, Guidelines on Hedging of Commodity Price Risk for Import Trades. Open the cited source.